How To Grip Tape a Longboard (DIY with 6 Steps)

Gripping a longboard is essential in maintaining your ride’s safety and stability. With the right tools and patience, anyone can learn how to grip tape a longboard effectively.

How to grip tape a longboard is a common question every player can ask their coaches. The simple answer to this question is that with the right tools, lay your longboard upside down, cut the tape according to your requirements, and apply it on the edges. In the end, cut the excess tape material to make it look smooth and even. 

So, without waiting, let’s dive into the details of a step-by-step guide.

Grip Tape a Longboard

To grip tape a longboard, you will need the following:

  • A skateboard or longboard. If your deck already has tape, use a heat gun to soften the grip and peel it off.
  • You can always cut the grip tape into sections if you need more.
  • A Stanley Knife blade is essential for any household.
  • A heat gun or hair dryer is only effective if the paint is cold or you need to remove the existing grip.
  • You’ll need something soft to avoid scratching your deck on your work surface.

Let’s start. As we all know, we can only finish something with starting, champs.

6 Easy Steps To Grip Tape a Longboard

1. Ensure you have all the supplies: a longboard, grip tape, razor blade or utility knife, and masking tape (optional).

2. Start by laying your longboard upside down on a flat surface. This will help keep the board from slipping when applying the grip tape.

Cut strips of grip tape to fit your board’s width. The length of each strip should cover one-third of the total length of the board for maximum coverage.

Grip Tape a Longboard

3. Peel off half of the backing from one edge of each strip and align it with the edge of your board. Apply pressure to the tape as you lay it along the board, slowly peeling off the remainder of the backing as you go.

4. Once all your grip tape is applied, use a good razor blade or a utility knife to trim any excess material. Ensure that all edges are smooth and even so they won’t catch on anything while riding.

Grip Tape a Longboard

5. Use masking tape (optional) to hold down any areas that have begun curling up due to exposure and temperature changes. This will help keep your grip tape in place for more extended periods.

steps to make Grip Tape a Longboard

6. Enjoy your freshly-gripped longboard! Your board should feel more secure now, and you can take it with you for a ride with confidence.

 There you have it. That’s how you grip-tape a longboard in 6 easy steps. This process becomes second nature with practice, and you’ll learn more about different grip tapes for your riding style. Have fun out there on your fresh new deck, champ. 

Should I put grip tape on a longboard?

Yes, putting grip tape on a longboard is highly recommended. Grip tape provides a rough, sandpaper-like surface on top of the board that helps keep your feet in place while riding. Without grip tape, your shoes may slip off the board, causing you to lose control and potentially fall.

Additionally, grip tape can enhance the aesthetics of your longboard, as it comes in a variety of colors and designs that can add personality and style to your board.

When applying grip tape, it’s important to make sure it is properly aligned and adhered to the board. This involves carefully cutting the grip tape to fit the shape of the board and smoothing out any air bubbles or creases.

Is it okay to wet grip tape?

No, it would help if you did not wet grip tape. Wetting the grip tape will make it less adhesive and can cause it to start peeling off or bubbling up. It is best to keep the grip tape dry when applying it and only use a heat gun if necessary. This will ensure that your board has maximum traction and will resist becoming loose over time.

Is Griptape sandpaper?

No, the grip tape is not just sandpapered. Griptape is made of a particular type of adhesive material that has tiny abrasive particles embedded in it. This gives the grip tape more grip and traction than regular sandpaper, which makes it ideal for longboarding. The grit size in grip tapes can vary from very coarse to very fine, depending on the application.

What is the best Grip tape for a longboard?

The best grip tape choice depends on your needs and riding style. Generally, coarser-grit grip tapes are better for downhill riders because they provide more traction and control when cornering at high speeds. Finer-grit grip tapes are usually better for freestyle riders because they provide a smoother, more comfortable ride. Ultimately, it is all down to personal preference and experimentation.

What is the best way to clean Griptape?

The ideal way to clean grip tape is with a damp cloth or sponge. Never use any abrasive cleaning agent, as this can damage your board’s finish. Instead, gently remove dirt and debris using mild detergent and warm water. Once you’re done cleaning, you can use a soft brush or vacuum cleaner to remove any remaining dirt particles. Make sure that your grip tape is completely dry before riding.

Can I cut Griptape with scissors?

Yes, you can cut grip tape with scissors. However, a razor blade or unique grip tape-cutting tool is best for more precise cuts and cleaner lines. A sharp utility knife can also be used, but make sure to put newspaper or some other type of protection beneath the tape to prevent scratches on your board.

Final Verdict

Now that you know how to grip-tape a longboard and what kind of grip tape is best for certain riding styles, get out there and experiment with different types of grip tapes until you find your perfect fit.

Gripping your longboard is an easy process that can be finished in just a few steps. With the right supplies and patience, your board can be ready to ride quickly! Ensure all edges are smooth after trimming excess material, and enjoy your freshly gripped longboard. You now have a secure and stable longboard ready for you to enjoy! Good luck and have fun, champ! Happy longboarding.

Wait!!!! You know what? We are developing more exciting longboard topics for you champs, so stay tuned with Longboard insider.

Share and care!
Photo of author

Walter Beard

Meet Walter Beard, a passionate Longboarded who has been immersed in the exhilarating world of longboarding for eight years. With his love for the sport, Walter understands the joy and excitement that comes from executing thrilling tricks and being part of a vibrant longboarding community.

Leave a Comment